HCIS Class 3 Fence: Robust Security for Varied Applications

HCIS Class 3 Fence? 

Explore HiTech’s HCIS Class 3 Fence, engineered for medium security requirements as per the standards of the High Commission for Industrial Security in Saudi Arabia. This category is specially designed to protect industrial facilities and sensitive areas that require robust but not maximum security measures

Contact Us

Chain Link Fabrics

Step into a realm where security meets sophistication—where every detail is meticulously crafted to safeguard what matters most. Chain link fabric with a 50x50 mm mesh size and a 3.76/4.2 mm wire diameter 2700mm High as per ASTM F668 Class 2B (PVC Fusion Bonded) is used in this system. This robust and flexible mesh combines galvanized steel wire and a durable PVC coating, providing exceptional strength, weather resistance, and aesthetic appeal.

Tension Wire

The tension wire provides horizontal tension and stability to the fence. It is typically run along the bottom edges. This prevents sagging and helps maintain the fence’s structural integrity, resisting forces like wind or physical impact. The Tension wire used in this system is 3.76/4.2 PVC fusion Bonded and there is one row used with this system.

Tie wire

Tie wire is used to secure the mesh or chain-link fabric to the tension wire and posts. It wraps around the fabric and the tension wire or posts, holding the fabric firmly in place. The Tie Wire used in this system is 3.76/4.2 PVC Fusion Bonded.

Concertina Wire

The anti-personnel fence shall consist of a 3m high fence configured with three rolls of concertina wire. The first concertina wire shall be mounted on top of the fence, with a second roll on the front. The razor tape shall be fabricated from Series 430 stainless steel. This system uses Concertina wire CBT-65 with a Ø2.5mm galvanized core wire and stainless-steel blades, featuring a 600mm coil diameter, enhances security by adding a coiled, razor-sharp barrier. Each coil shall contain 51 loops and cover 7.5m.

Line Posts

Line posts in the HCIS Fencing system measure 3600 mm in length, with a pipe diameter of 88.9 mm and a thickness of 7.62 mm. They weigh approximately 15.27 kg per meter and are placed every 3 meters. These posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa) respectively. These Posts are hot dipped galvanized in accordance with ASTM F1083 standards

Corner, End and Strainer Post

In the HCIS Fencing system, corner/strainer and end posts serve critical roles in providing robust structural support and security. These posts measure 3700 mm in length with a pipe diameter of 114 mm and a thickness of 8.56 mm, weighing approximately 22.32 kg per meter. These posts are crucial for providing robust structural support and security.

All strainer, corner, and end posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa) respectively. These Posts are hot dipped galvanized in accordance with ASTM F1083 standards.