HCIS Class 3 Fence: Fortifying Against Intrusion
HCIS Class 3 Fence | Sturdy Defense Line
To ensure maximum security enforcement in medium- to high-risk areas, our HCIS Class 3 Fence is a reliable solution. Adhering to the high commission for industrial security in Saudi Arabia, we offer effective protection in sensitive areas. It is catering to diverse needs where security is the primary concern, like prisons, military bases, and critical industrial sites.
Available Types
HCIS Class 3 Fence System | Hitech’s Top-notch Fence
Optimal Security
These fences are engineered to provide security perimeters to high-level areas. HCIS Class 3 fencing is a formidable fence
Durability and Resistance
Constructed with galvanized steel and coupled with PVC coating, these fences ensure optimal performance and durability against conditions
Regulatory Compliance
These fences are in compliance with HCIS standards. It ensures the security needs of industrial sectors are met in Saudi Arabia.
HCIS Class 3 Fence | Major Elements
Chain Link Fabrics
HCIS Class 3 Fences are composed of chain link fabrics that are not only powerful security fence but an aesthetic element to your landscape. These are curated with a 50x50 mm mesh, and a wire diameter of 3.76/4.2 mm. Fabrics are 2700 mm high and comply to ASTM F668 Class 2B standards. The infusion of galvanized steel wire and a sustainable PVC coating exudes ultimate strength and acts as a strong, weather-resistant product.
Wire Configurations
Tension Wire
To create horizontal tension and stability to the fence, a tension wire is instilled that runs along the bottom edges. Tension wire prevents sagging and maintains the structural integrity of the fence against wind or harsh impact. 4.5/2.9 PVC fusion system is incorporated in these wires.
Stirrup Wire
These wires are attached to the fences to provide additional support and attachment points. It is often connected to the vertical post to the mesh or chain-link fabric. It clinches to the high stress point of the fence to distribute load and pressure evenly across the structure. It’s used in this system is 2.5/3.0 PVC Fusion Bonded.
Tie wire
To fasten the tension wire and post to the mesh or chain-link fabric, we use tie wire. It enfolds around the fabric, and the tension wire firmly holds the fabric in place. Tie wire is utilized in the 1.4/2.0 PVC Fusion Bonded system.
Barbed Wire
The HCIS Saudi Arabia class 3 fence system incorporates barbed wire at the top of the fence to add a layer of security by fostering a hazardous boundary. The sharp and pointed barbs deter intrusion and restrain climbing potential. It ensures no unwanted access is granted by making the fence life-threatening. These wires are galvanized as per ASTM A121 with 6 rows at the top of the fence.
Concertina Wire
The anti-personnel fence shall consist of a 3 m high fence configured with three rolls of concertina wire. The concertina wire shall be mounted on top of the fence, with a second roll mounted on the front, and the third roll will be mounted on the bottom. The razor tape shall be fabricated from Series 430 stainless steel. This system uses Concertina wire CBT-65 with a Ø2.5mm galvanized core wire and stainless-steel blades, featuring a 600mm coil diameter, which enhances security by adding a coiled, razor-sharp barrier. Each coil shall contain 51 loops and cover 7.5 m.
Posts and Support Structures
Line Posts
Line posts in the HCIS Fencing system measure 3600 mm in length, with a pipe diameter of 88.9 mm and a thickness of 7.62 mm. They weigh approximately 15.27 kg per meter and are placed every 3 meters. These posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa), respectively. These posts are hot-dipped galvanized & PVC Coated in accordance with ASTM F1083 standards.
Corner, End and Strainer Post
Corner, end, and strainer post are the most focal points of the HCIS class 3 fence system, extending sturdy structural support and security. These posts measure 3700 mm in length with a pipe diameter of 114 mm and a thickness of 8.56 mm, weighing approximately 22.32 kg per meter. All strainer, corner, and end posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa), respectively. These posts are hot-dipped galvanized & PVC Coated in accordance with ASTM F1083 standards.
Fittings
Specifications: After the manufacturing process, all the fittings are hot-dipped galvanized in compliance with ASTM A-123 and A-153 standards to provide extreme corrosion resistance. It makes them durable and enhances their lifespan for outdoor use in diverse environmental situations.
HCIS Fence System | Key Features
High Security
Extends sturdy protection against intrusion and breaches that might cause harm or unauthorized access.
Durable Materials
Engineered with galvanized steel to provide strength and ensure long-lasting performance.
PVC Coating
Increases resistance to corrosion and adds a clean, visually appealing finish to the fence.
Variety of Posts
Includes strainer, corner, end, and line posts to meet diverse structural and site layout needs.
Continuous Top Rail
Distributes pressure and force equally across the fence, enhancing its overall strength and stability.
Galvanized Fittings
Extension arms, bands, bolts, and nuts are hot-dip galvanized to ensure lasting durability in harsh conditions.
Compliance
Meets ASTM A-123 and ASTM A-153 standards for high-performance galvanization and quality assurance.
Concertina Wire
Includes 3 rolls of CBT-65 concertina wire with Ø2.5mm galvanized core and SS430 stainless steel blades (600mm coil diameter).
Dimension (Post & Pipes)
| Item | Length (mm) | Pipe Dia (mm) | Thickness (mm) | Weight (Kg/m) |
|---|---|---|---|---|
| Line Post | 3600 | 88.9 | 7.62 | 15.27 |
| Corner/Strainer & End Post | 3700 | 114 | 8.56 | 22.32 |
| Brace Rail/Back Strut | 2900 | 60.3 | 3.91 | 5.44 |
| Top Rail | 6000 | 60.3 | 3.91 | 5.44 |
| Length: | 3600 mm |
| Pipe Dia: | 88.9 mm |
| Thickness: | 7.62 mm |
| Weight: | 15.27 Kg/m |
| Length: | 3700 mm |
| Pipe Dia: | 114 mm |
| Thickness: | 8.56 mm |
| Weight: | 22.32 Kg/m |
Wire Products
| Chain Link Fabrics | Tension Wire | Stirrup Wire | Tire Wire | Barbed Wire | ||||
|---|---|---|---|---|---|---|---|---|
|
3.76/4.2 1 row | 2.5/3.0 | 3.76/4.2 | 2.50 6 rows |
| Chain Link Fabrics (Opening) | 50 |
| Chain Link Fabrics (Wire Dia) | 3.76/4.2 |
| Tension Wire | 3.76/4.2 1 row |
| Stirrup Wire | 2.5/3.0 |
| Tire Wire | 3.76/4.2 |
| Barbed Wire | 2.50 6 rows |
Finishing & Customization
Hot-Dipped Galvanized
Hot Dip Galvanized in compliance with ASTM A-123 AND A-153
PVC Coating
PVC Coated in accordance with ASTM F1043
Installations
Hitech offers exceptional installation services, to meet HCIS standards.