HCIS Class 1 Fence: Ultimate Protection for High-Security Areas

HCIS Class 1 Fence? 

Explore the pinnacle of perimeter security with HiTech’s HCIS Class 1 Fence, specifically engineered to meet the stringent requirements of the High Commission for Industrial Security in Saudi Arabia. This top-tier security fence is ideal for protecting industrial facilities and sensitive areas where maximum security is paramount.

Contact Us

Chain Link Fabrics

Our HCIS Class 1 Fences utilize chain link fabric that is not just robust but also aesthetically pleasing. Crafted with a 50x50 mm mesh and a wire diameter of 3.76/4.2 mm, these fabrics are 2700mm high and conform to ASTM F668 Class 2B standards. The combination of galvanized steel wire and a durable PVC coating ensures outstanding strength and weather resistance, making it an ideal choice for high-security areas.

Tension Wire

The tension wire provides horizontal tension and stability to the fence. It is typically run along the bottom edges. This prevents sagging and helps maintain the fence’s structural integrity, resisting forces like wind or physical impact. The Tension wire used in this system is 3.76/4.2 PVC fusion Bonded and there is one row used with this system.

Stirrup Wire

Stirrup wire provides additional support and attachment points, often connecting the vertical posts to the mesh or chain-link fabric. It reinforces the fence at points of high stress, distributing loads and pressures evenly across the structure. The stirrup Wire used in this system is 2.5/3.0 PVC Fusion Bonded.

Tie wire

Tie wire is used to secure the mesh or chain-link fabric to the tension wire and posts. It wraps around the fabric and the tension wire or posts, holding the fabric firmly in place. The Tie Wire used in this system is 3.76/4.2 PVC Fusion Bonded

Barbed Wire

In the HCIS Fencing system, barbed wire is installed at the top of the fence to enhance security by creating a hazardous barrier. Its sharp barbs deter and prevent climbing attempts, making unauthorized access difficult and risky. The Barbed Wires used in this system are Galvanized as per ASTM A121 with 6 rows on Top of fence

Concertina Wire

In the HCIS Fencing system, barbed wire is installed at the top of the fence to enhance security by creating a hazardous barrier. Its sharp barbs deter and prevent climbing attempts, making unauthorized access difficult and risky. The Barbed Wires used in this system are Galvanized as per ASTM A121 with 6 rows on Top of fence

Line Posts

Line posts in the HCIS Fencing system measure 3600 mm in length, with a pipe diameter of 88.9 mm and a thickness of 7.62 mm. They weigh approximately 15.27 kg per meter and are placed every 3 meters. These posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa) respectively. These Posts are hot dipped galvanized in accordance with ASTM F1083 standards

Corner, End and Strainer Post

In the HCIS Fencing system, corner/strainer and end posts serve critical roles in providing robust structural support and security. These posts measure 3700 mm in length with a pipe diameter of 114 mm and a thickness of 8.56 mm, weighing approximately 22.32 kg per meter. These posts are crucial for providing robust structural support and security.

All strainer, corner, and end posts are SCH-80 as per ASTM F1083 and have a minimum tensile strength and yield strength of 48000 psi (330 MPa) and 30000 psi (205 MPa) respectively. These Posts are hot dipped galvanized in accordance with ASTM F1083 standards.

Fittings

Fittings Specification: All fittings are hot-dipped galvanized after manufacture in accordance with ASTM A-123 and A-153 standards to ensure superior corrosion resistance. This process makes them suitable for long-term outdoor use in various environmental conditions