تخطي للذهاب إلى المحتوى

Electric Sliding Gates in Saudi Arabia

​ Gate & Automation Electric Gate

Electric Sliding Gates

Hitech Fence manufactures electric sliding gates for factories, warehouses, logistics facilities, commercial properties and industrial sites across Saudi Arabia. Our steel sliding gates provide controlled vehicle access while making practical use of the available entrance space.

Each gate can be customized to suit the required opening width, height, fencing system and site conditions. The electric motor and operating system are selected according to the gate weight, expected usage and project requirements

Electric Sliding Gates
Electric Sliding Gates for Industrial and Commercial Entrances

Electric Sliding Gates for Industrial and Commercial Entrances

An electric sliding gate opens and closes sideways along the fence line. Unlike a swing gate, it does not need space in front of or behind the entrance to open.

Hitech's track supported electric sliding gates use steel wheels that move along a fixed rail. Guide rollers help keep the gate aligned, while an electric motor and drive rack move the gate automatically. This arrangement is suitable for sites that need controlled vehicle entry and have enough clear space beside the entrance for the gate to slide open.

Key Features of Hitech Electric Sliding Gates

  • Custom steel construction:

    Gate dimensions, frame sections and bracing are selected to suit the project.

  • Space saving operation:

    The gate moves sideways without occupying the vehicle approach.

  • Track and wheel system:

    Steel wheels support the gate as it moves along a fixed track.

  • Electric opening and closing:

    An electric gate operator drives the gate through a mounted rack.

  • Fence integration:

    Gate infill can be coordinated with chain link and other suitable perimeter fencing.

  • Protective finish options:

    Galvanizing and additional coatings can be specified according to site conditions.

Electric Sliding Gate Technical Specifications

The following table outlines the available configurations for Hitech electric sliding gates.

المواصفات Available configuration
Gate Type Single leaf, track supported electric sliding gate
Opening Width Typically 2–10 m; larger openings subject to review
Gate Height According to project requirements
Main Frame Steel circular hollow sections
Internal Bracing Selected according to gate dimensions
الملء Chain link mesh or other approved infill
Track System Fixed steel running rail
Electric Motor Selected according to gate weight and operating requirements
Drive System Gate mounted rack and electric operator
Finish Project specific protective coating
Controls and Safety According to approved project scope

Where Are Electric Sliding Gates Used?

Hitech electric sliding gates are suitable for controlled vehicle entrances at:

  • Industrial plants and manufacturing facilities
  • Warehouses and logistics yards
  • Construction and infrastructure sites
  • Utility facilities and substations
  • Industrial and commercial compounds
  • Government and controlled access facilities
  • Commercial parking and service entrances
  • Oil and gas facilities where permitted by project requirements

Custom Electric Sliding Gates for Your Project

Not every site needs the same gate. A warehouse entrance used throughout the day may have different operating requirements from a utility facility accessed occasionally.

Hitech reviews the required gate size, frame arrangement, infill, protective finish and expected operating frequency before confirming a suitable configuration. The available electrical supply, control method and safety requirements are also considered when selecting the electric gate system.

Custom Electric Sliding Gates for Your Project

Not every site needs the same gate. A warehouse entrance used throughout the day may have different operating requirements from a utility facility accessed occasionally.

Hitech reviews the required gate size, frame arrangement, infill, protective finish and expected operating frequency before confirming a suitable configuration. The available electrical supply, control method and safety requirements are also considered when selecting the electric gate system.

Electric Sliding Gate Installation and Site Requirements

An electric sliding gate needs a suitable foundation, a correctly aligned track and enough side clearance for the full gate to open. Ground levels, drainage, guide post positions and electrical connections should also be checked during planning. Installation, civil works, electrical connections, testing and commissioning are confirmed according to the agreed project scope.

Why Choose Hitech Electric Sliding Gates?

Hitech Fence combines steel gate fabrication with experience in perimeter fencing solutions for Saudi industrial and commercial projects.

Our team can coordinate gate dimensions, steel framing, infill and electric operation with the surrounding fencing system. We also review project drawings and technical requirements to help contractors and procurement teams select a suitable gate configuration.

Request an Electric Sliding Gate Quotation

Planning a new vehicle entrance or upgrading an existing gate? Share your required opening width, gate height, project location, drawings and operating requirements with Hitech Fence. Our team can review your requirements and prepare a technical and commercial proposal for the agreed scope.

Send Your Gate Enquiry
FAQs

Frequently Asked Questions

An electric sliding gate is an entrance gate that opens sideways using an electric motor. It is commonly used for controlled vehicle access at industrial and commercial properties.

Hitech's reference configurations commonly cover openings of approximately 2–10 metres. Larger openings can be reviewed according to the structural design and operating requirements.

The gate needs enough clear space beside the entrance to accommodate the gate leaf, guide arrangement and stopping position. The exact space depends on the final design.

Yes, where the existing fence and connection arrangement are technically suitable. The gate infill can be selected to match the surrounding perimeter.

Motor selection depends on gate weight, travel distance, daily operating frequency and site conditions. The final model is confirmed during technical review.

Hot dip galvanizing can be specified for suitable fabricated steel components. The final protective finish depends on the approved project requirements.

Installation, civil works, electrical connections, testing and commissioning can be discussed according to the project requirements. The agreed responsibilities are specified in the quotation or contract.

Share your required opening width, gate height, quantity, project location, preferred infill, available side space and operating requirements. Drawings and technical specifications will help the team prepare a suitable proposal.

موقعنا

تقدم خدماتها للمملكة العربية السعودية والمناطق المحيطة بها